The 2026 Harley-Davidson® CVO™ Street Glide® is engineered as a performance-oriented touring motorcycle with a defined focus on mechanical precision, structural integrity, and integrated electronic systems. This model incorporates a Milwaukee-Eight® VVT 121 engine, a six-speed transmission, a rigid steel frame, and a comprehensive suite of rider-assist technologies. Each component is configured to support consistent power delivery, controlled handling, and long-distance capability. The design integrates dimensional balance, drivetrain efficiency, and advanced infotainment without unnecessary complexity.
Engine Configuration and Output Characteristics
The 2026 Harley-Davidson® CVO™ Street Glide® uses the Milwaukee-Eight® VVT 121 engine with a displacement of 121 cubic inches or 1,977 cubic centimeters. The engine utilizes pushrod-operated overhead valves with hydraulic self-adjusting lifters and four valves per cylinder. This configuration maintains valve timing accuracy while reducing maintenance requirements associated with manual adjustment.
The bore measures 4.075 inches, and the stroke measures 4.625 inches. The compression ratio is set at 11.4 to 1, supporting efficient combustion and stable performance across varying operating conditions. The engine produces 115 horsepower at 4,500 rpm and delivers 139 ft-lb of torque at 3,000 rpm. These output figures indicate a focus on mid-range torque and steady acceleration suitable for highway riding and loaded touring conditions.
Fuel delivery is managed through Electronic Sequential Port Fuel Injection, which meters fuel precisely to each cylinder. The lubrication system is pressurized and uses a dry-sump configuration to maintain consistent oil distribution. The intake system includes a synthetic felt washable air cleaner, allowing repeated use after maintenance. Exhaust gases are routed through a 2-1-2 dual exhaust system designed for balanced flow and efficient evacuation.
Drivetrain Architecture and Gear Ratios
Power transfer from the engine to the rear wheel is managed through a combination of chain and belt drives. The primary drive uses a chain with a 34 to 46 ratio, while the final drive uses a belt with a 32 to 68 ratio. This combination provides durability and reduced maintenance requirements compared to full chain systems.
The transmission is a six-speed Cruise Drive® unit with gear ratios configured to support both low-speed maneuverability and highway efficiency. The first gear ratio is 9.593, followed by 6.65 in second gear, 4.938 in third gear, 4.0 in fourth gear, 3.407 in fifth gear, and 2.875 in sixth gear. These ratios allow gradual reduction in engine speed as road speed increases, which supports fuel efficiency and reduces engine strain at cruising speeds.
The clutch system is mechanically actuated and consists of a ten-plate wet clutch with Assist and Slip functionality. This design reduces lever effort during operation and minimizes rear wheel instability during aggressive downshifting. The configuration improves control during deceleration and contributes to smoother gear transitions.
Frame Structure and Suspension System
The chassis of the 2026 Harley-Davidson® CVO™ Street Glide® is constructed from mild steel using a tubular frame design with a two-piece stamped and welded backbone. The frame incorporates cast and forged junctions, twin down tubes, and a bolt-on rear section with forged fender supports. This structure is assembled using MIG welding to maintain strength and dimensional consistency.
The swingarm is also made from mild steel and features a two-piece drawn and welded section with forged junctions. This construction supports load distribution and maintains alignment during acceleration and braking.
The front suspension consists of 47 mm inverted forks, which increase front-end rigidity and improve handling precision. The rear suspension uses dual adjustable emulsion shocks. The left shock includes remote preload adjustment, while the right shock uses threaded preload adjustment. Suspension travel measures 4.6 inches at the front and 3 inches at the rear, providing sufficient damping for extended travel and varying road conditions.
Wheel Design, Tires, and Braking System
The 2026 Harley-Davidson® CVO™ Street Glide® uses cast aluminum wheels with a gloss black finish and a nine-spoke design. The front wheel measures 19 inches in diameter and 3.5 inches in width. The rear wheel measures 18 inches in diameter and 5 inches in width. These dimensions support stable handling and predictable steering response.
Tires are part of the Dunlop® Harley-Davidson® Series. The front tire specification is 130 by 60B19 M/C 61H, while the rear tire specification is 180 by 55B18 M/C 80H. These tire dimensions provide a balance between traction, stability, and load capacity.
The braking system uses dual front calipers with a 32 mm four-piston fixed design mounted radially. The rear brake uses a single axially mounted caliper. Front braking is supported by dual floating rotors with a diameter of 12.6 inches and a thickness of 0.18 inches. The rear rotor measures 11.8 inches in diameter and 0.28 inches in thickness. Anti-lock Braking System functionality is included as standard equipment, preventing wheel lock during sudden braking events.
Dimensional Specifications and Weight Distribution
The overall length of the 2026 Harley-Davidson® CVO™ Street Glide® is 94.9 inches, with a width of 38.4 inches and a height of 53.1 inches. The wheelbase measures 64 inches, contributing to straight-line stability and controlled handling at speed. The rake angle is 26 degrees, and the fork angle is 30 degrees, with a trail measurement of 6.7 inches. These geometry values define the steering characteristics and balance between responsiveness and stability.
Seat height in the laden condition is 26.7 inches, while the unladen seat height is 28.2 inches. Ground clearance is measured at 5.5 inches. These dimensions support accessibility and controlled rider positioning.
The weight of the 2026 Harley-Davidson® CVO™ Street Glide® is 800 pounds as shipped and 838 pounds in running order. The gross vehicle weight rating is 1,360 pounds, with a front axle rating of 500 pounds and a rear axle rating of 927 pounds. Luggage capacity is measured at 2.2 cubic feet, supporting extended travel requirements.
Fuel capacity is 6 gallons, with a reserve capacity of 1 gallon indicated through a warning light. Oil capacity with filter is 5 quarts, while the transmission holds 1 quart, and the primary chain case holds 1.1 quarts. Coolant capacity is 0.82 quarts. Estimated fuel economy is 45 miles per gallon.
Electrical System and Integrated Components
The electrical system includes a sealed, maintenance-free 12-volt battery rated at 28 amp-hours and 405 cold cranking amps. Charging is managed through a three-phase, 58-amp system with a maximum output of 754 watts at 13 volts. Starting is performed by a 1.6 kW electric starter motor with solenoid engagement.
Lighting components use LED technology for the headlamp, tail and stop lights, and front and rear turn signals. LED systems provide improved efficiency and consistent illumination compared to traditional lighting systems.
The instrument display integrates digital gauges within a central screen, providing access to vehicle information such as air temperature and oil pressure. A 15-watt USB-C power outlet is located in the media storage compartment, allowing connection and charging of compatible devices.
Infotainment System and Connectivity Features
The infotainment system operates on Skyline™ OS and uses a 12.3-inch full-color TFT display. The system provides clear visibility of navigation, audio, and vehicle data. Audio output is rated at 125 watts per channel and is delivered through four speakers. Two speakers are mounted in the fairing and measure 6.5 inches, while two saddlebag speakers measure 5 by 7 inches.
The system supports AM and FM radio functionality, as well as USB-based media playback. Bluetooth® connectivity enables hands-free mobile phone operation and media streaming. Rider and passenger intercom capability is supported through compatible headsets, with voice activation available.
Navigation is integrated into the system and includes traffic and weather updates through a Wi-Fi hotspot connection. Apple CarPlay® compatibility is available in both wired and wireless configurations. The USB-C interface supports smartphone integration through appropriate adapters.
Rider Safety Systems and Control Technologies
The 2026 Harley-Davidson® CVO™ Street Glide® includes a comprehensive set of rider safety enhancements. Anti-lock Braking System, Electronic Linked Braking, and Traction Control System are standard. The Drag-Torque Slip Control System manages rear wheel behavior during engine braking, while Vehicle Hold Control assists in maintaining position on inclines.
The Tire Pressure Monitoring System provides continuous monitoring of tire conditions, improving awareness and maintenance accuracy. Cornering-enhanced systems adjust braking and traction control based on lean angle. These include Cornering Anti-lock Braking System, Cornering Electronic Linked Braking, Cornering Traction Control, and Cornering Drag-Torque Slip Control. These systems contribute to stability during cornering and improve control under varying riding conditions.
Visit Harley-Davidson® of Santa Clarita for a Test Ride
Riders seeking to evaluate the 2026 Harley-Davidson® CVO™ Street Glide® can arrange a test ride through Harley-Davidson® of Santa Clarita near Westlake, CA. This provides an opportunity to assess engine output, transmission response, and suspension behavior under controlled conditions. The integrated safety systems and infotainment features can be observed directly during operation. A scheduled test ride allows detailed examination of handling characteristics, braking performance, and rider interface systems. Contact our dealership to coordinate a time and review the motorcycle’s full range of technical capabilities in person.