2026 Harley-Davidson® Street Bob® near Westlake, CA

Rider on a 2026 Harley-Davidson® Street Bob® cruising past city buildings, photographed through a window.

The 2026 Harley-Davidson® Street Bob® is engineered as a performance-oriented cruiser that combines modern mechanical components with a simplified structural design. The motorcycle integrates a Milwaukee-Eight® 117 Classic engine, a Softail®-based frame architecture, and a six-speed drivetrain intended to deliver strong torque output, controlled handling, and consistent mechanical reliability. Each component serves a specific functional role in supporting stable road performance and predictable ride dynamics.

The model measures 91.3 inches in overall length with an overall width of 36.4 inches and a height of 45.7 inches. A wheelbase of 64.2 inches supports directional stability at highway speeds. The steering geometry includes a 30-degree rake and a trail measurement of 6.2 inches, which contributes to steady steering behavior during both straight-line riding and gradual cornering. Static ground clearance measures 4.9 inches. The seat height measures 25.8 inches when loaded and 26.8 inches when unladen, which provides an accessible riding position and consistent rider control during low-speed maneuvers.

The motorcycle weighs 622 pounds in shipped condition and approximately 646 pounds in running order. These measurements reflect the structural mass of the frame, engine, and supporting mechanical systems. The Gross Vehicle Weight Rating is listed at 1,160 pounds. The Gross Axle Weight Rating is distributed between 450 pounds at the front and 730 pounds at the rear. These figures establish the load capacity and structural limits of the motorcycle.

Milwaukee-Eight® 117 Classic Engine Architecture

The 2026 Harley-Davidson® Street Bob® uses the Milwaukee-Eight® 117 Classic V-twin engine. This engine configuration provides a displacement of 117 cubic inches, which equals 1,923 cubic centimeters. The engine uses pushrod-operated overhead valves with hydraulic self-adjusting lifters and four valves per cylinder. This valvetrain arrangement supports consistent valve timing and reduces the need for periodic valve adjustments.

The bore measures 4.075 inches, and the stroke measures 4.5 inches. These measurements create a long-stroke engine configuration that prioritizes torque production at lower engine speeds. The compression ratio is rated at 10.3 to 1. This ratio balances combustion efficiency and engine durability while maintaining compatibility with recommended high-octane fuel.

Fuel delivery is controlled through Electronic Sequential Port Fuel Injection. This system meters fuel precisely for each cylinder and adjusts delivery according to throttle position and engine load. The fuel system contributes to smooth throttle response and efficient combustion across the engine’s operating range.

Engine torque is measured at 120 foot-pounds at 2,500 rpm. Maximum power output is rated at 98 horsepower at 4,600 rpm. The torque testing method follows the J1349 standard, which provides a controlled measurement of engine output under regulated conditions. 

The air intake system includes a 9-inch round air cleaner with a center bolt cover and a washable fiberglass filter element. The exhaust system uses a 2-into-1 configuration with a catalyst integrated into the header. This design supports exhaust flow efficiency while maintaining emissions compliance.

Lubrication is provided through a pressurized dry-sump system with an integrated oil cooler. This configuration stores oil in a separate reservoir and circulates it through the engine to maintain stable operating temperatures during sustained operation.

Six-Speed Drivetrain and Power Transfer System

The drivetrain of the 2026 Harley-Davidson® Street Bob® transfers engine output through a combination of chain- and belt-driven components. The primary drive uses a chain with a 34-to-46 ratio that transfers engine power to the transmission assembly.

The motorcycle uses a six-speed Cruise Drive® transmission. This gearbox provides a range of ratios designed for controlled acceleration and efficient highway operation. The gear ratios progress from 9.311 in first gear to 2.79 in sixth gear. These ratios allow the engine to operate at lower rpm levels during highway travel while maintaining sufficient torque multiplication during initial acceleration.

The final drive uses a belt system with a 32-to-66 ratio. A belt-driven system reduces mechanical noise and typically requires less maintenance compared with traditional chain-driven final drives. The belt system also provides smooth engagement during acceleration and deceleration.

A mechanical 10-plate wet clutch connects the engine to the transmission. The clutch uses an assist and conventional design. The assist mechanism reduces clutch lever effort while maintaining strong engagement during acceleration and gear transitions. The multi-plate wet configuration allows the clutch plates to operate in an oil bath, which helps regulate temperature and extend component durability.

Structural Frame and Chassis Engineering

The chassis structure of the 2026 Harley-Davidson® Street Bob® is constructed from mild steel using tubular sections and a rectangular backbone design. The frame incorporates stamped, cast, and forged junctions that increase structural strength at critical stress points. Assembly is completed using MIG welding techniques.

Aluminum forged fender supports are integrated into the structure to reduce overall weight without compromising rigidity. This frame construction is designed to provide stability during acceleration, braking, and cornering while supporting the mass of the large-displacement V-twin engine.

The swingarm uses mild steel tubular sections combined with stamped cross-members and forged axle junctions. The swingarm is also assembled using MIG welding methods. A removable belt spacer supports the alignment of the belt-driven final drive system.

The motorcycle uses Dunlop® Harley-Davidson® Series bias blackwall tires. The front tire specification is 100/90B19 with a D401F model designation. The rear tire specification is 150/80B16 with a D401T designation. These tires are engineered to provide consistent traction and stability under cruiser-riding conditions.

The front wheel uses a black Annihilator cast aluminum design with a diameter of 19 inches and a width of 2.5 inches. The rear wheel uses a matching Annihilator cast aluminum wheel with a diameter of 16 inches and a width of 3 inches. Optional painted aluminum tubeless laced wheels are available depending on the configuration.

Suspension Configuration and Ride Dynamics

The front suspension of the 2026 Harley-Davidson® Street Bob® uses a 49 millimeter telescopic fork equipped with a dual-bending valve design. Aluminum fork triple clamps provide structural support while maintaining reduced component weight. Dual-rate springs allow the fork to manage varying compression forces during braking and road impacts.

Suspension travel at the front measures 5 inches. This range of motion allows the front wheel to absorb surface irregularities while maintaining steering precision.

The rear suspension uses a hidden coil-over monoshock with a free-piston design. The monoshock provides 43 millimeters of stroke and includes a cam-style preload adjustment system. This adjustment mechanism allows the rider to modify suspension stiffness according to rider weight or cargo load.

Rear suspension travel measures 3.4 inches. The suspension geometry is tuned to balance ride comfort with stable chassis behavior during acceleration and cornering.

Braking Hardware and Control Systems

The braking system of the 2026 Harley-Davidson® Street Bob® uses a single front rotor paired with a four-piston fixed caliper. The front rotor measures 11.8 inches in diameter and has a thickness of 0.2 inches. This configuration provides controlled braking force and consistent heat distribution during repeated braking events.

The rear braking system uses a rotor measuring 11.5 inches in diameter with a thickness of 0.23 inches. A two-piston floating caliper applies braking pressure to the rear rotor. The floating caliper design allows for even contact with the rotor surface during operation.

Both rotors use a solid uniform expansion design that maintains braking performance across varying temperatures. Anti-lock Braking System technology is included as standard equipment. This system prevents wheel lock during sudden braking by modulating hydraulic pressure to the brake calipers.

Electrical Architecture and Rider Interface

The electrical system of the 2026 Harley-Davidson® Street Bob® uses a sealed maintenance-free absorbed glass mat battery rated at 12 volts and 17.5 amp-hours. The battery provides 310 cold-cranking amps at zero degrees Fahrenheit, which supports a reliable engine starting in low-temperature conditions.

Charging power is supplied through a three-phase 48-amp electrical system. The system produces 364 watts at 900 rpm and can reach a maximum output of 624 watts at 2,000 rpm. This capacity supports the motorcycle’s lighting system, instrumentation, and accessory power outlet.

Engine starting is handled by a 1.6 kilowatt electric starter motor with solenoid shift engagement. The starter motor delivers sufficient torque to rotate the large-displacement V-twin engine during ignition.

The lighting system uses LED technology for all major lighting components. The headlamp includes LED low beam, high beam, and signature position lighting. Front and rear turn signals use bullet-style LED units. The tail and stop lamp also use LED illumination.

Instrumentation is presented through a four-inch analog speedometer combined with a digital information display. The display includes indicators for gear position, odometer readings, fuel level, ride modes, traction control status, ABS indicators, tire pressure monitoring data, cruise control, trip distance, range estimation, tachometer readings, and a digital clock.

A USB Type-C power outlet is installed to provide device charging capability. The outlet delivers five volts with a maximum output of 2.4 amps.

Integrated Rider Safety Systems

The motorcycle incorporates several electronic systems designed to assist rider control and stability. The anti-lock Braking System technology prevents wheel lock during heavy braking. The system monitors wheel rotation and adjusts brake pressure automatically.

Traction Control System technology regulates rear wheel traction during acceleration. When rear-wheel slip is detected, the system adjusts engine output to restore traction.

Drag-torque Slip Control System technology manages rear wheel stability during aggressive downshifting. The system moderates engine braking forces that could otherwise cause rear wheel instability.

A Tire Pressure Monitoring System provides continuous monitoring of tire pressure levels. The system alerts the rider if pressure drops below recommended levels, which supports consistent handling performance.

Cornering rider safety systems include the Cornering Enhanced Anti-lock Braking System and the Cornering Enhanced Traction Control. These systems adjust braking force and traction response during lean angles. Cornering Drag-Torque Slip Control provides similar adjustments during downshifting while the motorcycle is leaned into a turn.

Fuel Capacity and Operational Efficiency

The fuel tank of the 2026 Harley-Davidson® Street Bob® holds 3.5 gallons of fuel. A fuel injection warning light indicates when the reserve capacity of approximately one gallon is reached. The engine oil capacity with filter measures five quarts. The transmission requires one quart of lubricant, while the primary chain case holds 1.25 quarts.

Estimated fuel economy is rated at approximately 47 miles per gallon using combined city and highway testing conditions. This level of efficiency supports extended riding distances while maintaining the power output associated with the Milwaukee-Eight® 117 engine.

Schedule a Test Ride Today

Riders interested in examining the mechanical characteristics of the 2026 Harley-Davidson® Street Bob® can arrange a test ride through Harley-Davidson® of Santa Clarita near Westlake, CA. A test ride allows riders to evaluate the Milwaukee-Eight® 117 engine output, the six-speed transmission response, and the structural stability of the Softail® chassis. Riders can also observe the function of the traction control system, braking hardware, and digital instrumentation during operation. Experiencing the motorcycle in motion provides a clear understanding of how its suspension design, drivetrain configuration, and rider safety systems operate together. Contact our team to schedule a test ride and review the full technical capabilities of the 2026 Harley-Davidson® Street Bob®.


Contact Us