The 2026 Harley-Davidson® Road Glide® is designed as a fixed-fairing touring motorcycle that integrates high-displacement V-Twin performance, a rigid steel chassis, electronic rider-assist systems, and a fully digital infotainment interface. This model combines measurable engine output with structured geometry and advanced braking control. Its specifications define its performance capabilities, from torque delivery and gear ratios to lean angles and suspension travel. The 2026 Harley-Davidson® Road Glide® presents a balanced configuration built for long-distance riding, consistent throttle response, and controlled handling under load.
Milwaukee-Eight® 117 Engine Architecture and Output
The 2026 Harley-Davidson® Road Glide® is powered by the Milwaukee-Eight® 117 engine with a displacement of 117 cubic inches or 1,923 cc. The engine features a bore of 4.075 inches and a stroke of 4.5 inches. A 10.3:1 compression ratio supports efficient combustion and sustained output across the operating range.
The engine produces 130 ft-lb of torque at 3,250 rpm and 105 horsepower at 4,600 rpm. Torque testing follows the J1349 standard. This torque curve supports strong acceleration from lower engine speeds and consistent highway performance at cruising rpm. The V-Twin configuration uses pushrod-operated overhead valves with hydraulic, self-adjusting lifters and four valves per cylinder. This valve design reduces routine adjustment requirements while maintaining efficient airflow.
Fuel delivery is managed by Electronic Sequential Port Fuel Injection. This system meters fuel precisely to maintain consistent throttle response and optimized combustion efficiency. The engine uses a pressurized dry-sump lubrication system that maintains oil circulation under varied riding conditions. Air intake is supported by a fiberglass washable air cleaner designed for durability and serviceability. Exhaust flow is managed through a 2-1-2 dual exhaust system with tapered mufflers to maintain balanced back pressure and regulated rumble output.
The motorcycle carries 5 quarts of oil with a filter. Coolant capacity is 0.82 quarts. The fuel tank holds 6 gallons, with a 1-gallon reserve indicated by a warning light. Estimated fuel economy is 44 miles per gallon based on city and highway testing methods. These specifications support extended riding intervals between refueling stops.
Six-Speed Cruise Drive® Transmission and Drivetrain Ratios
Power is transferred through a 6-Speed Cruise Drive® transmission engineered for highway efficiency and low engine rpm at cruising speeds. The primary drive uses a chain with a 34/46 ratio. Final drive is managed by a belt system with a 32/68 ratio. The belt drive reduces maintenance requirements and supports smooth power transfer to the rear wheel.
Overall gear ratios are structured for progressive acceleration and stable highway operation. First gear has an overall ratio of 9.593. Second gear is 6.65. Third gear is 4.938. Fourth gear is 4. Fifth gear measures 3.407. Sixth gear is 2.875. These ratios provide controlled launch capability in lower gears and reduced engine speed in sixth gear for extended cruising.
The clutch is a mechanically actuated 10-plate wet Assist and Slip design. This system reduces lever effort and helps regulate rear-wheel engagement during aggressive downshifts. The combination of transmission gearing and clutch design supports consistent acceleration and deceleration control.
Frame Construction and Structural Geometry
The 2026 Harley-Davidson® Road Glide® uses a mild steel tubular frame with a two-piece stamped and welded backbone. Cast and forged junctions strengthen structural connection points. Twin down tubes contribute to rigidity, and the rear frame section bolts on with forged fender supports. The frame is MIG welded to maintain structural integrity under touring loads.
The swingarm is constructed from mild steel with a two-piece drawn and welded section and forged junctions. This configuration supports rear suspension stability and consistent wheel tracking during acceleration and cornering.
Steering geometry includes a 26-degree rake and a 29.25-degree fork angle. Trail measures 6.8 inches. Wheelbase is 64 inches. These measurements contribute to directional stability at highway speeds while maintaining predictable steering response during cornering.
The motorcycle has a static ground clearance of 5.7 inches. Lean angle capability measures 32 degrees to the right and 32 degrees to the left, tested according to SAE J1168. These values define the platform’s cornering limits before hard-part contact.
Suspension Configuration and Ride Control
Front suspension uses a 49 mm Dual Bending Valve fork. This system is engineered to maintain damping control under varied load and road conditions. Front suspension travel measures 4.6 inches.
Rear suspension consists of dual outboard emulsion shocks with preload adjustability. Rear suspension travel measures 3 inches. Adjustable preload allows the rider to compensate for passenger weight or luggage load to maintain ride height and handling consistency.
The motorcycle weighs 802 pounds as shipped and 838 pounds in running order. Gross Vehicle Weight Rating is 1,360 pounds. Gross Axle Weight Rating is 500 pounds at the front and 927 pounds at the rear. These values define load capacity and structural limits.
Wheels, Tires, and Braking Hardware
Cast aluminum wheels are fitted front and rear. The front wheel measures 19 inches in diameter and 3.5 inches in width. The rear wheel measures 18 inches in diameter and 5 inches in width.
The motorcycle uses Dunlop® Harley-Davidson® Series bias blackwall tires. The front tire specification is 130/60B19 M/C 61H. The rear tire specification is 180/55B18 M/C 80H. These tire dimensions support load-bearing requirements and maintain balanced traction.
Front braking uses dual 12.6-inch floating rotors with 4-piston fixed dual axially mounted calipers. Rotor thickness measures 0.18 inches. Rear braking uses a single 11.8-inch fixed rotor with a thickness of 0.28 inches. This braking configuration distributes stopping force across both wheels to support consistent deceleration.
Electronic Rider Safety and Stability Systems
The 2026 Harley-Davidson® Road Glide® integrates multiple electronic safety systems as standard equipment. Anti-lock Brake System regulates brake pressure during hard braking to reduce wheel lock. Electronic Linked Braking coordinates front and rear braking distribution. Traction Control System monitors rear wheel speed to manage slip during acceleration. Drag-torque Slip Control System assists in regulating rear-wheel behavior during downshifting. Vehicle Hold Control helps maintain brake pressure during incline stops.
Cornering-enhanced systems expand this functionality by integrating lean angle data. Cornering Enhanced ABS adjusts brake intervention based on lean angle. Cornering Enhanced Electronic Linked Braking modifies braking distribution during cornering. Cornering Enhanced Traction Control adapts torque control when the motorcycle is leaned. Cornering Drag-torque Slip Control supports rear-wheel stability during downshifts while leaned.
A Tire Pressure Monitoring System is included to provide continuous tire pressure data to the rider. Wheel Lift Mitigation and Enhanced Lift Mitigation are not included on this model.
Electrical Output and Lighting Systems
The motorcycle uses a sealed, maintenance-free 12-volt battery rated at 28 amp-hours and 405 cold cranking amps. The charging system is a three-phase 58-amp configuration capable of producing up to 754 watts at 13 volts. This output supports lighting, infotainment, and accessory loads.
Starting is managed by a 1.6 kW electric starter with solenoid shift engagement. All primary lighting components use LED technology. The headlamp, tail and stop light, front signal lights, and rear turn signals are LED units. LED lighting supports visibility and long service life.
A 15-watt USB-C electric power accessory port is located in the media storage box. This port allows charging of compatible devices while riding.
Skyline™ OS and Integrated Display Technology
The 2026 Harley-Davidson® Road Glide® includes the Skyline™ OS infotainment system. The display is a 12.3-inch full-color TFT screen integrated into the fairing. Digital gauges are embedded within this display, providing vehicle information such as air temperature and oil pressure.
Audio output delivers 50 watts per channel through two 5.25-inch fairing-mounted speakers. Standard AM and FM radio capability is included. SD card, flash drive, and MP3 playback are supported via USB connection.
Hands-free mobile phone functionality is available through Bluetooth® connectivity. The system supports phone, media player, and headset pairing. Apple CarPlay® compatibility is included through wireless or wired connection. USB-C and MTP smartphone connectivity function with appropriate adapters located within the inner fairing storage compartment.
An embedded GPS navigation system is included. Traffic and weather information are available through Wi-Fi hotspot connections in supported regions. Navigation can also function via Bluetooth® integration.
Dimensions, Ergonomics, and Storage Capacity
Overall length measures 94.9 inches. Overall width is 37.2 inches. Overall height measures 51.8 inches. Laden seat height is 26.6 inches based on a 180-pound operator weight measurement. Unladen seat height measures 28.3 inches.
Luggage capacity is 2.42 cubic feet. This storage volume supports touring requirements for extended travel. The fuel tank capacity of 6 gallons contributes to extended riding range when combined with the estimated 44 miles per gallon fuel economy.
Schedule a Test Ride near Westlake, CA
We invite you to examine the 2026 Harley-Davidson® Road Glide® in detail and experience its measured 130 ft-lb torque output, structured chassis geometry, and integrated cornering-enhanced safety systems. A test ride allows you to evaluate throttle response, suspension behavior, braking precision, and the functionality of the Skyline™ OS display under operating conditions. You can assess the 6-Speed Cruise Drive® transmission, lean-angle capability, and electronic rider-assist features directly from the seat. Our team at Harley-Davidson® of Santa Clarita near Westlake, CA will provide a full technical walkthrough and answer specification-based questions during your visit. Schedule your test drive to review the engineering and performance characteristics of this touring platform firsthand.