2026 Harley-Davidson® Heritage Classic near Westlake, CA

2026 Harley-Davidson® Heritage Classic in black riding through downtown street, side view of a helmeted rider passing a vintage theater marquee.

The 2026 Harley-Davidson® Heritage Classic combines large-displacement V-twin performance with a steel cruiser chassis, modern braking controls, and a simplified rider interface. Built around the Milwaukee-Eight® 117 Classic engine and supported by a six-speed Cruise Drive® transmission, this model delivers defined torque output, measurable horsepower, and integrated cornering rider safety systems. Its structural frame design, dual-bending valve front suspension, and preload-adjustable rear monoshock establish a balanced platform intended for stable highway travel and controlled low-speed maneuvering. Every specification reflects mechanical consistency, regulated testing standards, and engineered durability.

Engine Configuration and Output Specifications

The 2026 Harley-Davidson® Heritage Classic uses the Milwaukee-Eight® 117 Classic engine with a displacement of 117 cubic inches or 1,923 cubic centimeters. The engine features a bore of 4.075 inches and a stroke of 4.5 inches. Compression ratio measures 10.3 to 1. Valve operation follows a pushrod design with overhead valves, hydraulic self-adjusting lifters, and four valves per cylinder. This configuration supports consistent valve timing and reduced maintenance adjustment requirements.

The engine produces 120 foot-pounds of torque at 2,500 rpm under J1349 testing standards. Peak power output is rated at 98 horsepower or 73 kilowatts at 4,600 rpm. Torque delivery concentrates in the lower rpm range to support acceleration from standing starts and controlled roll-on performance at highway speeds. Fuel delivery operates through Electronic Sequential Port Fuel Injection. The air intake uses a nine-inch round air cleaner with a center bolt cover and washable fiberglass filter media. Exhaust routing follows a two-into-one layout with a catalyst integrated in the header.

Lubrication uses a pressurized dry-sump system with an oil cooler to maintain stable operating temperatures during sustained riding. Oil capacity with filter measures five quarts.

Fuel Range and Efficiency Metrics

Fuel capacity measures 5 gallons, equivalent to 18.9 liters. The reserve fuel capacity, activated by a warning light in the fuel injection system, measures 1 gallon or 3.8 liters. Fuel economy is estimated at 47 miles per gallon under city and highway testing conditions, equivalent to 5 liters per 100 kilometers. These figures indicate a balance between displacement output and fuel consumption efficiency for long-distance riding applications.

Transmission, Clutch, and Final Drive Ratios

The drivetrain incorporates a chain-driven primary with a 34/46 ratio and a belt-driven final drive with a 32/66 ratio. Power transfers through a six-speed Cruise Drive® transmission. Gear ratios measure 9.311 in first gear, 6.454 in second, 4.793 in third, 3.882 in fourth, 3.307 in fifth, and 2.79 in sixth. These ratios provide strong mechanical advantage in lower gears and reduced engine rpm at highway cruising speeds.

The clutch assembly consists of a mechanical 10-plate wet clutch with assist and conventional operation. This design reduces lever effort while maintaining consistent engagement under varying load conditions. The transmission capacity measures one quart, and the primary chain case capacity measures 1.25 quarts.

Frame Architecture and Structural Composition

The 2026 Harley-Davidson® Heritage Classic uses a mild steel tubular frame with a rectangular section backbone. Junction points combine stamped, cast, and forged components secured with MIG welding. Aluminum forged fender supports contribute to structural reinforcement while managing weight distribution. The swingarm consists of mild steel tubular sections with a stamped cross member and forged axle junctions. It includes a removable belt spacer and is also MIG welded for structural consistency.

Chassis geometry includes a 30-degree rake and a 30-degree fork angle. Trail measures 5.5 inches. Wheelbase measures 64.2 inches, supporting longitudinal stability. Static ground clearance measures 4.7 inches. These measurements influence steering response, lean stability, and overall balance.

Suspension Design and Travel Measurements

Front suspension uses a 49-millimeter telescopic fork equipped with dual-bending valve technology and dual-rate springs. Aluminum fork triple clamps enhance rigidity. Front suspension travel measures 5.1 inches, allowing controlled compression over varied pavement conditions.

Rear suspension incorporates a hidden free-piston coil-over monoshock with a 56mm stroke and hydraulic preload adjustment. Rear suspension travel measures 4.4 inches. The hydraulic preload adjustment allows the rider to compensate for added passenger or luggage weight while preserving handling geometry.

Wheel and Tire Specifications

Standard wheels are black nine-spoke cast aluminum units. Both front and rear wheels measure 16 inches in diameter and three inches in width. An optional black tubeless laced wheel configuration with 36 bright spokes is available depending on region.

The motorcycle uses Dunlop® Harley-Davidson® Series bias blackwall tires. The front tire specification is 130/90B16 with a 73H rating. The rear tire specification is 150/80B16 with a 77H rating. These tire dimensions support consistent load handling and stable cornering performance.

Brake Components and Mechanical Dimensions

The front braking system uses a four-piston fixed caliper acting on a solid uniform expansion rotor measuring 11.8 inches in diameter and 0.2 inches in thickness. The rear brake uses a two-piston floating caliper with a rotor measuring 11.5 inches in diameter and 0.23 inches in thickness. The front brake is not dual disc. Brake component dimensions support balanced stopping force distribution across the chassis.

Lean angle capability measures 27.4 degrees to the right and 27.4 degrees to the left under J1168 testing standards. These measurements define maximum lean limits under controlled testing conditions.

Integrated Rider Safety Enhancements

Anti-lock Braking System is included as standard equipment. Traction Control System and Drag-torque Slip Control System are also included. The Tire Pressure Monitoring System provides pressure status feedback to the rider. Cornering Enhanced Anti-lock Brake System and Cornering Enhanced Traction Control System adjust braking and traction response based on lean input. Cornering Drag-torque Slip Control System further refines engine braking behavior during lean conditions. Electronic Linked Braking and Wheel Lift Mitigation are listed as not applicable. Vehicle Hold Control and Enhanced Lift Mitigation are not included.

Electrical Capacity and Charging System

The motorcycle uses a sealed, maintenance-free absorbed glass mat battery rated at 12 volts, 17.5 amp hours, and 310 cold cranking amps at zero degrees Fahrenheit. Charging operates through a three-phase 48-amp system delivering 364 watts at 13 volts and 900 rpm, with a maximum output of 624 watts at 13 volts and 2,000 rpm. Starting is handled by a 1.6 kilowatt electric starter with solenoid shift motor engagement.

Lighting components are fully LED. The headlamp includes low beam, high beam, and signature position lamp functions. The tail and stop lamp use an LED Buffet design. Front turn signals are LED bullet units and rear turn signals integrate into an LED bullet light bar. Auxiliary lighting includes LED fog lamps.

Instrumentation and Rider Interface Systems

Instrumentation centers around a five-inch analog speedometer paired with a digital information display. The digital interface presents gear position, odometer, fuel level, ride modes, heated gear status, traction control, ABS indication, Tire Pressure Monitoring System status, cruise control, clock, trip meters, fuel range, and tachometer data. This configuration consolidates operational data within a single display cluster.

An electric power outlet provides USB C-Type output rated at five volts and 2.4 amps. The motorcycle does not include a GPS system, reverse function, infotainment system, screen size specification, Bluetooth® connectivity, navigation integration, headset capability, or audio speaker configuration. These systems are listed as not applicable, reinforcing a simplified rider interface focused on mechanical operation.

Dimensions, Weight Distribution, and Load Ratings

Overall length measures 95.1 inches. Overall width measures 36.6 inches. Overall height measures 54.7 inches. Seat height when laden measures 26.3 inches, based on a 180-pound operator weight. Seat height when unladen measures 27.2 inches. Weight as shipped measures 690 pounds, and weight in running order measures 719 pounds.

Gross Vehicle Weight Rating measures 1,160 pounds. Gross Axle Weight Rating measures 450 pounds at the front and 730 pounds at the rear. Luggage capacity volume measures 1.6 cubic feet. These figures define load distribution limits and total carrying capacity.

Visit Harley-Davidson® of Santa Clarita to Schedule a Test Ride

We invite you to examine the 2026 Harley-Davidson® Heritage Classic in person and assess its measurable torque output, suspension travel, and integrated cornering safety systems through direct operation. At Harley-Davidson® of Santa Clarita near Westlake, CA, our team can provide a structured walk-through of its Milwaukee-Eight® 117 engine configuration, six-speed Cruise Drive® transmission, and braking system specifications. A scheduled test ride allows you to evaluate throttle response, clutch engagement, and ABS function under controlled conditions. You can observe the five-inch instrumentation cluster, LED lighting configuration, and Tire Pressure Monitoring System feedback during operation. Contact our dealership to arrange your appointment and review the complete technical attributes of this model firsthand.


Contact Us