The 2026 Harley-Davidson® CVO™ Road Glide® ST is a performance-focused touring motorcycle built around a high-output Milwaukee-Eight® engine, a substantial chassis package, integrated infotainment, and advanced rider support systems. It combines Road Glide® touring proportions with CVO™ equipment and ST-focused functional hardware. The model uses a 121 cubic-inch engine, a 6-Speed Cruise Drive® transmission, adjustable suspension components, radial-mounted front braking hardware, and a full-color digital interface. Its specifications also include defined luggage volume, LED lighting, embedded navigation capability, smartphone connectivity, and a comprehensive suite of rider safety enhancements.
Powertrain and Performance
The 2026 Harley-Davidson® CVO™ Road Glide® ST uses the Milwaukee-Eight® 121 High Output engine as its main performance component. This engine has a displacement of 121 cubic inches, or 1,977 cc, and uses a 4.075-inch bore with a 4.6-inch stroke. The compression ratio is 11.4:1, which supports the engine’s high-output configuration. The valve system uses pushrod-operated overhead valves with hydraulic, self-adjusting lifters and four valves per cylinder. The engine produces 145 ft-lb of torque at 4,000 rpm and 127 HP, or 95 kW, at 4,900 rpm.
Fuel Delivery, Air Intake, Exhaust, and Lubrication
The fuel system on the 2026 Harley-Davidson® CVO™ Road Glide® ST uses Electronic Sequential Port Fuel Injection. This system manages fuel delivery for the Milwaukee-Eight® 121 High Output engine and works with 91 octane or higher fuel. The air cleaner uses a fiberglass, washable design, which gives the intake system a serviceable component. The exhaust system uses a 2-1-2 dual exhaust layout with tapered mufflers. The lubrication system uses a pressurized, dry-sump configuration to support oil circulation through the engine during operation.
Output, Lean Angle, and Fuel Economy
The 2026 Harley-Davidson® CVO™ Road Glide® ST pairs its engine output with chassis data that defines its performance envelope. The engine torque testing method is J1349, with the 145 ft-lb torque figure measured at 4,000 rpm. The power rating reaches 127 HP at 4,900 rpm, which identifies the engine speed for peak horsepower output. The motorcycle has a 31-degree lean angle on both the right and left sides under the SAE J1168 testing method. Estimated city and highway fuel economy appears at 44 mpg, or 5.3 l/100 km, which gives the model a defined operating-efficiency reference.
Drivetrain and Transmission
The drivetrain on the 2026 Harley-Davidson® CVO™ Road Glide® ST transfers engine output through a chain primary drive, a wet clutch, a six-speed gearbox, and a belt final drive. The primary drive uses a chain with a 34/46 ratio. The final drive uses a belt with a 30/68 ratio. The clutch uses a mechanically actuated 10-plate wet design with Assist and Slip functionality. The 6-Speed Cruise Drive® transmission gives the model six forward gears for controlled power delivery across changing speeds.
Clutch Design and Gear Ratios
The 10-plate wet clutch supports the connection between the Milwaukee-Eight® 121 High Output engine and the 6-Speed Cruise Drive® transmission. Its mechanically actuated design gives the drivetrain a direct operating layout. Assist and Slip functionality appears as part of the clutch specification, which adds a defined functional element to the power-transfer system. The transmission uses overall gear ratios of 10.233 in first, 7.093 in second, 5.268 in third, 4.266 in fourth, 3.635 in fifth, and 3.067 in sixth.
Chassis, Frame, and Dimensions
The 2026 Harley-Davidson® CVO™ Road Glide® ST uses a mild steel tubular frame designed around stamped, welded, cast, and forged structural elements. The frame includes a two-piece stamped and welded backbone, cast and forged junctions, twin down-tubes, and a bolt-on rear frame with forged fender supports. Harley-Davidson® specifies MIG-welded construction for the frame. The swingarm also uses mild steel construction with a two-piece drawn and welded section, forged junctions, and MIG welding.
Size, Steering Geometry, and Weight Ratings
The 2026 Harley-Davidson® CVO™ Road Glide® ST measures 94.9 inches in length, 36.4 inches in overall width, and 50.4 inches in overall height. The motorcycle has a 64-inch wheelbase and 5.1 inches of static ground clearance. Its steering geometry includes a 26-degree rake, a 29.25-degree fork angle, and 6.7 inches of trail. The seat height measures 27.5 inches laden and 28.3 inches unladen, with the laden measurement based on a 180 lb operator. The motorcycle weighs 800 lb as shipped and 838 lb in running order, with a gross vehicle weight rating of 1,360 lb.
Capacity and Load-Related Specifications
The 2026 Harley-Davidson® CVO™ Road Glide® ST includes capacity figures that support its touring function. The front gross axle weight rating measures 500 lb, while the rear gross axle weight rating measures 927 lb. Fuel capacity measures 6 gallons, and the reserve fuel warning capacity measures 1 gallon. Oil capacity with filter measures 5 quarts, transmission capacity measures 1 quart, primary chain case capacity measures 1.1 quarts, and coolant capacity measures 0.82 quarts. Luggage capacity measures 2.42 cubic feet, or 0.069 cubic meters, which gives the motorcycle integrated storage volume within its bagger layout.
Suspension, Wheels, Tires, and Brakes
The suspension and wheel package on the 2026 Harley-Davidson® CVO™ Road Glide® ST supports its high-output touring configuration with adjustable components and model-specific wheel sizing. The front suspension uses 47 mm inverted 1x1 front forks. These forks include adjustable preload, compression damping, and rebound damping. The rear suspension uses emulsion shocks with adjustable preload, compression damping, and rebound damping. Front suspension travel measures 4.6 inches, while rear suspension travel measures 3 inches.
Wheel and Tire Specifications
The 2026 Harley-Davidson® CVO™ Road Glide® ST uses black 7-spoke cast aluminum wheels at both ends. The front wheel measures 19 inches in diameter and 3.5 inches in width. The rear wheel measures 18 inches in diameter and 5 inches in width. The tires use Dunlop® Harley-Davidson® Series bias blackwall construction for the front and rear. The front tire is a D408F in 130/60B19 M/C 61H sizing, and the rear tire is a D407T in 180/55B18 M/C 80H sizing.
Brake Hardware and Rotor Design
The braking system on the 2026 Harley-Davidson® CVO™ Road Glide® ST uses dual front brake hardware and a single rear brake layout. The front calipers use a 4-piston fixed design with dual radial mounting. The rear caliper uses a single axial-mounted configuration. The front brakes use dual floating Wave Style rotors that measure 12.6 inches in diameter and 0.18 inches in thickness. The rear brake uses a fixed rotor that measures 11.8 inches in diameter and 0.28 inches in thickness.
Electrical System, Lighting, and Instrumentation
The electrical system on the 2026 Harley-Davidson® CVO™ Road Glide® ST supports starting, charging, lighting, device power, digital gauges, navigation, and infotainment operation. The motorcycle uses a sealed, maintenance-free 12V battery rated at 28 amp-hours. The battery also carries a 405 cold cranking amp rating under the Battery Council International standard. Charging comes from a three-phase 58-amp system with a maximum output at 754 watts at 13 volts. Starting uses a 1.6 kW electric system with solenoid shift starter motor engagement.
LED Lighting and Rider Information
The 2026 Harley-Davidson® CVO™ Road Glide® ST uses LED lighting for the headlamp, tail and stop lamp, front signal lights, and rear turn signals. This lighting package gives the motorcycle a consistent LED specification across the exterior lighting functions. Digital gauges integrate within the main display rather than relying on a separate analog-focused layout. The vehicle information screen includes air temperature, oil pressure, and EITMS information. The media storage box also includes a 15-watt USB-C electric power accessory port for compatible device support.
Infotainment, Connectivity, and Navigation
The infotainment system on the 2026 Harley-Davidson® CVO™ Road Glide® ST uses Skyline™ OS through a 12.3-inch full-color TFT screen. This display serves as the interface for digital gauges, vehicle information, audio functions, and supported connectivity features. The system includes two 6.5-inch fairing speakers and 125 watts per channel. AM and FM radio are standard, while MW, LW, and Weather Band are not included. The audio and display equipment give the motorcycle an integrated technology package within the fairing-mounted interface.
Media, Phone, USB, and Intercom Functions
The 2026 Harley-Davidson® CVO™ Road Glide® ST supports SD card, flash drive, and MP3 use through a USB connection. USB-C, MTP, and smartphone connectivity work with compatible phones that use proper adapters to the connection located in the inner fairing storage area. Phone connectivity includes Apple CarPlay® through wireless or wired operation. Bluetooth® supports phone, media player, and headset functions, and hands-free mobile phone operation through Bluetooth® appears as standard. Rider and passenger intercom capability requires separately sold headsets, and VOX is available for H-D headsets.
Embedded Navigation
The 2026 Harley-Davidson® CVO™ Road Glide® ST includes an embedded navigation system. The navigation system can provide traffic and weather information through a Wi-Fi Hotspot, with subscription requirements in the United States. This function integrates navigation capability into the motorcycle’s onboard technology package. Text-to-speech language support follows the listed language set. The combination of navigation, smartphone support, Bluetooth® functionality, and USB connectivity gives the model a broad digital interface for touring use.
Rider Safety Enhancements
The 2026 Harley-Davidson® CVO™ Road Glide® ST includes a comprehensive set of rider safety enhancements that support braking control, traction management, tire-pressure visibility, and hold functionality. The Anti-lock Brake System is included as part of the motorcycle’s braking support package. Electronic Linked Braking is also included and works as a rider-assist feature. Traction Control System and Drag-Torque Slip Control System appear as included equipment. Vehicle Hold Control and Tire Pressure Monitoring System also come included, while wheel lift mitigation is not listed for this model.
Cornering Enhanced Systems
The 2026 Harley-Davidson® CVO™ Road Glide® ST also includes cornering-enhanced rider safety features. The Cornering Enhanced Anti-lock Brake System appears as included equipment. Cornering Enhanced Electronic Linked Braking also appears as part of the model’s safety package. Cornering Enhanced Traction Control System and Cornering Drag-Torque Slip Control System are included as well. Enhanced lift mitigation is not listed, which keeps the cornering safety package focused on braking, linked braking, traction, and drag-torque slip control functions.
Comfort, Utility, and Touring Function
The 2026 Harley-Davidson® CVO™ Road Glide® ST combines touring dimensions with rider-focused features that support longer operation, device use, information access, and integrated storage. The laden seat height of 27.5 inches gives the rider a defined seating reference, while the unladen seat height measures 28.3 inches. The 6-gallon fuel capacity supports extended travel planning within the motorcycle’s listed specifications. The 2.42 cubic feet of luggage volume provides usable storage space within the bagger format. The USB-C power accessory port, embedded navigation, fairing speakers, digital gauges, and vehicle information screen add functional convenience without changing the model’s mechanical focus.
Rider Interface and Practical Equipment
The rider interface on the 2026 Harley-Davidson® CVO™ Road Glide® ST centers on the 12.3-inch full-color TFT display and Skyline™ OS. The display integrates digital gauges and vehicle information in one location. The system supports Apple CarPlay®, Bluetooth® media, Bluetooth® phone use, headset connectivity, USB-based media access, and navigation. The fairing speakers provide the audio output through two 6.5-inch units.
Schedule a Test Ride Today
The 2026 Harley-Davidson® CVO™ Road Glide® ST gives riders a direct way to evaluate high-output performance, adjustable suspension, integrated technology, touring comfort, braking hardware, and rider safety features from the seat. Our team can review the Milwaukee-Eight® 121 High Output engine, 6-Speed Cruise Drive® transmission, Skyline™ OS display, connectivity features, luggage capacity, and suspension settings in detail. Schedule a test ride with Harley-Davidson® of Santa Clarita near Westlake, CA, to experience the model’s handling, comfort, technology, and performance in person. Our team can help you focus on the functional attributes that matter most during the ride without adding unnecessary pressure or distractions.